Low Finned Tubes
The ‘Low Fin Tube’ is also known as Integral Fin Tube. This type of fin tube is widely being used in the Industry Today.
The Low Fin Tubes/Integral Fin Tubes are increasingly being used in various Fluid Heat Exchangers. Unlike other Fin Tubes the application is not limited to Air – Fluid type of heat exchangers. As a result they are used in various types of Shell And Tube heat exchanger also.
The fins are manufactured rolling the Fin in the Base tube Itself. The fin height is relatively very low. However number of Fins Per inch or the fin Density can be increased greatly and improve the heat transfer area. The rolling is done on a special machine and the same can be supplied in straight as well as U bend configuration.
We can supply material on an urgent delivery basis because of our large stock and relations with raw material suppliers. We use only Prime Quality base tube and aluminium material.
The Extruded fin Tubes can be supplied with EN 10204 EN 3.1, and EN 3.2 certifications. We can provide a third-party inspection from any reputed inspection agency.
These Fin Tubes find applications in the Oil Coolers, Shell and Tube Heat Exchangers, etc.
Properties of Low Fin Tubes or Integral Fin Tubes:-
Manufacturing Process:- Cold Rolling of Fin on the Base tube Itself.
Fin To Tube Bond:- NA f(fin is made from the base tube itself)
Heat Transfer Efficiency:- Good
Mechanical Resistance: – Good
Corrosion Protection: – Moderate
Temperature Range:- Up to Maximum 415 Deg C
Specifications
| Base tube materiale | Stainless Steel, Carbon Steel, Alloy Steel, Titanium, Copper, Duplex Stainless Steel, and Inconel etc. (all material in the theoretical limit) |
|---|---|
| Base Tube Outside Diameter | 12.70 mm to 38.10 mm |
| Base Tube Thickness | 2.11 mm & Above |
| Base Tube Length | 500 mm min to 15000 mm |
| Fin Density | Up to 1023 FPM (26 FPI) |
| Bare Ends | As per Client Requirement |
| Capacity | 6500 meter per day |
